Drewgard auto

LOCATED IN EAST GRINSTEAD WEST SUSSEX UK 'PLEASE SCROLL DOWN THE PAGE' THANKYOU!

A- series FRONT SUSPENSION SWIVEL HUB KING PIN TO SEALED BALL JOINT CONVERSION

Should you wish to ask about having a conversion carried out, please call Chris Day of Bridport Dorset on his mobile number 07902 186602, or write to his email artrider50@aol.com   He is now dealing with all new enquiries. The prices on this page may now differ slightly but will give you a good idea.

This registered Design has been satisfactorily tested by STATUS at Manchester Metropolitan University and orders are supplied with a certificate of conformity.

Here is a unique answer to the perennial question when taking your Citroen A series car for its MOT, ‘Will the kingpins get through this year?’ Our CONVERSION of both the front swivel hubs from king pin to upper and lower sealed massed produced suspension ball joints has proved very successful, making the steering more precise and responsive on all surfaces. When a ball joint needs to be replaced (after a very long time of course), the job can be completed very quickly.

We supply standard and lowered ride height versions.

The outright price of a pair of front suspension arms is £795 ex works, BUT

we reimburse £250 in exchange for your swivel hubs and suspension arms, providing they are fully serviceable, stripped and cleaned of grease, mud and under seal ready for blasting.

Shipping to mainland UK is £20, and includes insurance against loss or damage.

Terms are £250 with order, the balance due when we are ready to ship, at which point we email you a picture of the completed work and a statement of the balance due.

The ball joint kit for A-series TRACK ROD ENDS forms part of the total conversion of the front suspension to replaceable sealed ball joints. To fit it on a standard 2CV chassis, the track rods need to be made shorter in order to accommodate the necessary adapters.

This particular image shows a standard track rod end... please view the track rod conversion page for the sealed ball joint unit.

This particular image shows a standard track rod end... please view the track rod conversion page for the sealed ball joint unit.

We allow £40 exchange for a pair of steering pivot levers and £20 exchange for a pair of track rods.

The outright exchange price for a set of converted track rod ends is £265 ex works. It can be purchased at a 15% discount if bought on the same order as the kingpin conversion. Please see the 'track rod end conversion' page.

 
P1010002-2.JPG

A pair of standard ride height suspension arms, their swivel hubs converted from king pin to sealed ball joint mountings. The arms are supplied coated in etch primer mid grey paint.

Email info@drewgard.co.uk