Components unique to the Drewgard Roadster.

The prices shown below will allow you to get a feeling for the cost of your project. You may well have your own used Citroen 2CV parts around, or indeed you may decide to use a standard chassis or exhaust system, or not specify the ball joint suspension conversion. If you have some other parts gaps, then we may well be able to fill them from our stock. As this is quite a recent project, some prices are still to be negotiated and are marked TBA, but soon we expect to have every price published

Here is a note about the terms relating to ordering parts to build this Roadster. Any part you contact us to purchase that is made to order, (that is almost everything just at the moment…sorry!) we shall send you a Pro forma showing the full amount, of which we shall ask you to fund half of the price of any part costing over £100 and the full price including delivery for parts under £100. We then make the part ready to ship, at which point the balance including any delivery charges we agree with you will become due. After the balance is paid we then ship the parts.

If you have questions, please do talk to us entirely without obligation, many thanks.

1. Aluminium alternative O.E.chassis frame £TBA

2.Kingpin to sealed ball joint suspension arm/swivel hub conversion. Left hand. Track widened, camber set to upright, ride height lowered. £362. Will accept serviceable exchange arm £25, swivel hub £25.

3.Kingpin to sealed ball joint suspension arm/swivel hub conversion. Right hand. Track widened, camber set to upright, ride height lowered. £362. Will accept serviceable exchange arm £25 and swivel hub £25.

4.Rear suspension arm right hand. Back plate reset for lowered ride height, track widened, £190. Will accept serviceable exchange right rear arm £25.

5.Rear suspension arm left hand. Back plate reset for lowered ride height, track widened, £190. Will accept serviceable exchange left rear arm £25.

6.Steering pivot lever sealed ball joint conversion pair, £125 Will accept any steering pivot levers, £5 each.

7.Pair of spring cylinder units, Spring rates upgraded, longer pull rods, £250. Will accept serviceable exchange units £25 each.

8.Exchange extended gear shift lever £TBA

9.Pair of rear bump stop towers £75

Performance exhaust system, comprising:

10.Bigger bore free flow exhaust manifold £255

11.Stainless bigger bore inter pipe or swan neck section, £79

12.Stainless expansion box £125. This connects at its front with the inter pipe and at its rear with two stainless torpedo side 2CV silencers that are £99 each.

13.Stainless front tail pipe £20

14.Stainless rear tail pipe £20

15.Chrome double tail pipe trim unit £20

16. Not ‘unique’ but there aren’t many around that we know. This is our own ‘A’ series type original reproduction anti-roll bar set £299

17.Slotted Azur style tubeless 15” road wheel rim silver finish £115 each.

18.Safety steering column assembly £150

19. Extended inner drive shaft £125 each

20. Centre body section frame, with floors, steering column cross member, mid bulkhead frame with adjustable height roll over hoop features (that may be substituted with a fully structural version if desired fitted with rear stays, see separate price) mountings for safety belt points, ignition switch/lock, pedal and clutch cable mount, door hinge and door striker mounts, hand brake pull ratchet and gear lever brackets. £950

21.Centre body section aluminium panels comprising sills, ‘A’ and ‘B’ post reveals, foot well, mid bulkhead, quarter and top panels, fascia, optional instrument housing (see separate price). £TBA

22.Polycarbonate wind shield £65

23.Left hand door frame, door handle, aluminium door box and door skin, £TBA

24.Right hand door frame, door handle, aluminium door box and door skin, £TBA

25.Front aluminium valence panel £TBA

26.Front left side aluminium wing panel and wheel well, £TBA

27.Front right side aluminium wing panel and wheel well, £TBA

28.Bonnet aluminium panel £TBA

29.Rear body section with aluminium rear valence, wheel wells, boot compartment and top panel £TBA

30.Boot lid aluminium panel £TBA

31.Front indicator £25 each

32.Side indicator repeater each £13

33.Exchange 2CV 1980-90 front right lowered seat frame with added head rest, stylishly trimmed with piping detail £350 each. Seat frame surcharge £45 each.

34. Front coil mounting and wing anchor frame, £TBA

35.Other non 2CV parts of the Roadster are 7” circular headlamps with side light in them £TBA, rear light clusters £TBA, rear fog and reversing lights £TBA, bullet wing mirror, ‘Lomax’ clutch cable from Ecas 2CV parts.

Preferred options to standard Citroen parts are sports steering wheel, dash instrumentation circular dial cluster, alternative lighting controls, 135mm Toyo tubeless tyres